| 1. | The output transformer is capacitively coupled to the anode
输出变压器电容耦合到屏级。 |
| 2. | Type bcc audio frequency output transformers
Bcc型音频输出变压器 |
| 3. | Push pull offers an advantage that se amplifiers don ' t offer relative to the output transformer
推挽和单端的主要不同在于其变压器。 |
| 4. | Hollow output transformer , efficiency and reliability of the entire machine
无空心输出变压器，整机效率高，可靠，比电子管式高频高25 % |
| 5. | Now , the auxiliary power on subway vehicles mostly takes use of bi - inverters , which have two output transformers and a huge bulk
目前,我国的地铁车辆辅助电源主要采用双重逆变器结构形式,具有两台输出变压器,体积庞大。 |
| 6. | The purpose of this article is to describe different ways in which you can hook an output transformer and plate ( anode ) circuit together , along with the relative advantages and disadvantages of each
写这篇文章的目的是为了描述有关输出变压器和屏级电路的多种连接方式，以及它们各自的优缺点。 |
| 7. | It is only using one high voltage cable to serve as the common one - turn primary winding for all the output transformers . in addition , the isolation voltage level for the transformers can be made very high
使用超高压绝缘的电缆线作为所有输出变压器单匝的原边绕组，电源输出之间的隔离电压可以达到相当高的等级。 |
| 8. | This dissertation presents a novel design based on multiple structure , it is controlled by three mcu at the same time , and the sine wave is outputted with the superposition of three groups of square wave voltage rising through the output transformer with different turns ratios , and three turns ratios are interrelated
本文给出了一个基于三个单片机协同控制、多重化结构的新型逆变充电器设计。三组方波电压经对应变压器升压后串联叠加输出，变压器变比分别成比例关系。 |
| 9. | Five different structures are described : standard transformer coupling , parafeed , resistively loaded stage capacitively coupled to the output transformer , tube ( valve ) based constant current source load capacitively coupled to the output transformer , and solid state ( mos fet ) constant current source load capacitively coupled to the output transformer
我们将讨论五种不同的方式：标准变压器耦合；旁馈耦合；电阻性负载电容性耦合至输出变压器；胆恒流源负载电容性耦合至输出变压器；以及晶体管恒流源负载电容性耦合至输出变压器。 |
| 10. | This effects can be explained as follows : the radiation conditions are actually impedance matching condition in terms of microwave network , for a fixed dimension of a resonator and output transformer , only below the critical plasma density " , the matching condition can be satisfied in the smith circle map
我们提出，这一现象可从阻抗匹配的角度来解释。对于一确定尺寸的腔体、阻抗变换器，存在一个等离子体密度的临界值，只有在等离子体密度低于这个临界值时，腔体的输出阻抗和波导的特性阻抗才能满足匹配，即满足所谓的辐射条件。 |
